News
NFSI Gains Recognition by the DOJ Pursuant to the National Cooperative Research and Production Act
The NFSI issues a Letter of Interpretation for the ANSI/NFSI B101.1-2009 Standard.
B101 Operating Procedures:
Download the B101 Operating Procedures. [click here]
B101 Sub-Committee's:
Click Links Below To View Details On Each Sub-Committee:
B101.0 Walkway Surface Auditing Procedure for the Measurement of Walkway Slip Resistance
The B101.0 subcommittee is chaired by
Brent Johnson, Traction Auditing, Inc.
Scope: This standard provides the technical procedures for walkway auditing and measuring the coefficient of friction (tribometry) of walkway surfaces in both public and private facilities.
Purpose: The purpose of this standard is to provide specific methods and procedures for the performance of a walkway audit, which may, by its performance, reduce or prevent injuries and fatalities from slips and falls.
Application: This standard sets forth the requirements in the process of walkway surface auditing using a three (3) risk class approach to structure a detailed and systematic procedure resulting in an auditor's report suggestive of warranted interventions.
CLOSE THIS ITEM
B101.1 Test Method for Measuring Wet SCOF of Common Hard-Surface Floor Materials
The B101.1 subcommittee is chaired by
Steve Spencer, State Farm Insurance Company.
Scope: This test method specifies the procedures and devices used for both laboratory and field testing to measure the wet static coefficient of friction (SCOF) of common hard-surface floor materials.
Purpose: This test method provides a measurement procedure setting forth traction ranges that facilitate remediation of walkway surfaces when warranted.
Application: This test method does not apply to carpeting of any type or mechanically polished tile such as polished porcelain, marble, etc., but does address the common hard-surfaced flooring materials such as ceramic tile, vinyl floor coverings, and wood laminates, as well as coatings, polishes, etc.
CLOSE THIS ITEM
B101.2 Test Method for Determining the Impact on Wet Dynamic Coefficient of Friction of Various Chemical or Physical Walkway Surface Treatments
The B101.2 Subcommittee is chaired by
Heidi Wilcox, The Massachusetts Toxics Use Reduction Institute, UMass Lowel
Scope: This standard covers the change in dynamic coefficient of friction (DCOF) resulting from various chemical or physical walkway surface treatments on ceramic tile or other hard floor surfaces under wet conditions. This standard can be used in the laboratory or in the field.
Purpose: This standard should be used for the purpose of judging the relative impact of a particular chemical or physical walkway surface treatment on a specific hard floor substrate with regards to the wet DCOF of that surface. This is just one factor in determining the safety of the floor from a slip resistance perspective.
Application: This standard applies to various chemical or physical walkway surface treatments on appropriate hard floor surfaces under wet conditions. Its application is limited by the technology used to measure wet DCOF, and does not apply to all walkway surfaces (detailed further in the standard).
CLOSE THIS ITEM
B101.3 Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials (Including Action and Limit Thresholds for the Suitable Assessment of the Measured Values)
The B101.3 subcommittee is chaired by
Bill King, Impact General.
Scope: This test method specifies the procedures and devices used for both laboratory and field testing to measure the wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials.
Purpose: This test method provides a measurement procedure setting forth DCOF ranges which facilitate remediation of walkway surfaces when warranted.
Application: This test method does not apply to carpeting of any type, however does address the common hard-surfaced flooring materials such as: ceramic and porcelain tile, polished concrete, stone, vinyl floor coverings, wood and synthetic laminates, and such materials with coatings or polishes applied.
CLOSE THIS ITEM
B101.4 Test Method for Measuring the Wet Barefoot Condition of Flooring Materials or Products.
The B101.4 subcommittee is chaired by
Scott Moore, Moore Engineering Services, LLC..
Scope: This test method specifies the testing procedures and devices used for both laboratory and field testing to measure wet barefoot slip resistance and to establish a product specification for flooring materials or products that are designed to be used under wet barefoot conditions (ie: bathing areas, swimming pool decks, boat decks. etc.)
Purpose: The purpose of this standard is to provide a means of quantitatively, and meaningfully, assessing the slip resistance of areas, and locations, that are expected, and/or known, to be wet while being accessed by barefoot individuals, and to significantly reduce the likelihood of injuries resulting from slips in these areas.
Application: This standard is meant to be used by designers and manufacturers of flooring and walkway materials, architects, interior designers, janitorial and maintenance personnel and anyone else otherwise responsible for maintaining the safety of wet areas accessed and utilized by barefoot individuals.
CLOSE THIS ITEM
B101.5 Standard Guide for Uniform Labeling Method for Identifying the Wet Static Coefficient of Friction (Traction) of Floor Coverings, Floor Coverings with Coatings, and Treated Floor Coverings
The B101.5 subcommittee is chaired by
Thomas F. Bresnahan, CSP Chairman
Scope: This guideline sets forth a uniform product labeling method which identifies the wet static coefficient of friction (traction) of floor coverings, floor coverings with coatings, and treated floor coverings.
Purpose: The purpose of this standard is to offer, at the point of product sale, guidance to users/purchasers on the traction capabilities of the contents of the package through display of labels and markings.
Application: This standard applies to floor products used primarily on public and private areas where pedestrians are not supervisory controlled. The term "floor products" refers to floor coverings, coatings, and treatments intended for floor coverings except carpeting, rugs, mats, runners, and artificial turf.
CLOSE THIS ITEM
B101.6 STANDARD GUIDE FOR COMMERCIAL ENTRANCE MATTING IN REDUCING SLIPS, TRIPS AND FALLS.
The B101.6 subcommittee is chaired by
Bob Moran, Ludlow Composites Corporation.
Scope: This standard provides the criteria for the selection, installation, inspection, care and maintenance of entrance mats and runners in commercial facilities in reducing slips, trips and falls.
Purpose: This standard is directed to eliminating slip, trip and fall hazards including but not limited to soil, moisture, contaminant removal, edge treatments and the improper use of floor mats and runners.
Application: The requirements of this standard pertain to the safe usage and applications, design, construction, and quality criteria of floor mats and runners.
CLOSE THIS ITEM
B101.7 Standard Test Method for Lab Measurement of Footwear Outsole Material Slip Resistance.
The B101.7 subcommittee is chaired by
Dr. Kurt Beschorner, University of Wisconsin-Milwaukee.
Scope: Specifies the procedures and devices used for laboratory measurement of footwear outsole materials slip resistance under wet and or oily-wet conditions.
Purpose: To provide a testing methodology for laboratory assessment of the slip-resistant qualities of footwear outsole materials within procedural and instrumental parameters under wet or oily-wet conditions.
CLOSE THIS ITEM
B101.8 A Floor Safety Management Program for Slip, Trip, and Fall Prevention.
The B101.8 subcommittee is chaired by
Thomas F. Bresnahan, CSP, Bresnahan Consulting Associates.
Scope: This standard establishes the minimum elements of a management program for the prevention of slips, trips and falls.
Purpose: The purpose of this standard is to assist organizations in their efforts to establish a management organizational structure, including the roles and responsibilities at each managerial, supervisory and operational level, to mitigate the risk of slips, trips and falls.
CLOSE THIS ITEM
Work Items:
B101.2, B101.4 and B101.8 are in development.
B101.4 and B101.7 sub-committees are currently establishing committee members. please contact Laura Cooper if you would like to participate on one of these subcommittee's.
Current Standards:
ANSI/NFSI B101.0-2012 Walkway Surface Auditing Procedure for the Measurement of Walkway Slip Resistance
ANSI/NFSI B101.1-2009 Test Method for Measuring Wet SCOF of Common Hard-Surface Floor Materials
ANSI/NFSI B101.3-2012 Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials (Including Action and Limit Thresholds for the Suitable Assessment of the Measured Values)
ANSI/NFSI B101.5-2012 Standard Guide for Uniform Labeling Method for Identifying the Wet Static Coefficient of Friction (Traction) of Floor Coverings, Floor Coverings with Coatings, and Treated Floor Coverings
ANSI/NFSI B101.6-2012 Standard Guide for Commercial Entrance Matting in Reducing Slips, Trips and Falls
Meetings:
The next B101 Main Committee meeting is scheduled for April 8, 2013 at the NFSI Corporate Office in Southlake, Texas. Please contact Laura Cooper for more information at laurac@nfsi.org.
Membership:
The ANSI B101 committee is accepting applications for membership (click here for membership application). The current annual membership fee is based on one of three categories (see below).
Producer: An entity that produces or supplies any product that can be related to slip, trip and fall prevention. This includes, but is not limited to manufacturers of: flooring material, cleaners and surface finishes; floor auditing, testing, buffing and burnishing devices etc. Annual member dues are based upon the following chart:
Producer (net income):
| 5 |
$500 million |
> |
$5,000.00 |
| 4 |
$250 million |
$499,999,999 million |
$3,500.00 |
| 3 |
$150 million |
$249,999,999 million |
$2,000.00 |
| 2 |
$100 million |
$149,999,999 million |
$1,000.00 |
| 1 |
< |
$99,999,999 million |
$750.00 |
Users: An entity that maintains or installs any pedestrian walking surface or consumes products which impacts the probability of slips, trips and falls. Users also include the owners and occupiers of said premises and those providing consultative services in the evaluation of slips, trips and falls. Example walking surfaces include: walkways, floors, pools, spas, tubs, showers, boats, construction sites etc. Annual Member dues are based upon a flat fee of $495.
General Interest: General Interest members are neither Producers, Users nor Trade Associations. This category includes, but is not limited to, regulatory agencies (state and federal), researchers, , educators and any individual or organization that is effected by or interested in the need for slip, trip and fall prevention. Annual Member dues are based upon a flat fee of $495.
Contact Us:
Russell J. Kendzior, Secretary
P.O. Box 92607
Southlake, TX 76092
PH: (817) 749-1705
FX: (817) 749-1702
russk@nfsi.org
Laura Cooper, Manager-Member Relations
National Floor Safety Institute
P.O. Box 92607
Southlake, TX 76092
PH: (817) 749-1700
FX: (817) 749-1702
laurac@nfsi.org
Click Links Below To Download Committee/Sub-Committee Rosters:
B101 Main Committee Roster
B101.0 Sub-Committee Roster
B101.1 Sub-Committee Roster
B101.2 Sub-Committee Roster
B101.3 Sub-Committee Roster
B101.4 Sub-Committee Roster
B101.5 Sub-Committee Roster
B101.6 Sub-Committee Roster
B101.7 Sub-Committee Roster
B101.8 Sub-Committee Roster